During the processing of precision metal stamping parts, due to the plastic deformation of the metal and friction with the mold, it is inevitable to produce oil stains, sweat stains, and metal particles attached to the surface. In order to ensure product quality and extend its service life, the correct cleaning method is particularly important. The following content will provide a detailed introduction to effective cleaning steps.

Firstly, pretreatment is an important step in the cleaning process. Soak the stamped parts in a weakly alkaline degreasing solution, and use the saponification and emulsification effects of the solution to remove surface grease and dirt. This process not only loosens tough stains, but also lays a good foundation for subsequent deep cleaning.

Next, perform ultrasonic cleaning. Place the preprocessed stamped parts into a dedicated ultrasonic cleaning machine, and generate countless tiny bubbles through high-frequency vibration. These bubbles quickly rupture under pressure, generating strong impact force and completely peeling off the attachments on the stamped parts. This method is particularly suitable for stamping parts with complex structures, as it can penetrate into hidden gaps for cleaning.

Then, use spray cleaning. Use high-pressure water flow or professional cleaning solvents to spray the stamped parts to remove residual tough dirt. This method is simple and fast, suitable for large-scale operations.

In addition, for precision stamping parts with high requirements, methods such as steam cleaning or vacuum cleaning can also be used. These methods can avoid secondary contamination of stamped parts during the cleaning process and ensure high cleanliness.

After cleaning, rinse with pure water to remove residual cleaning agent. Afterwards, perform drying treatment to prevent rust or water stains from occurring. Drying can be done using clean compressed air or in a professional drying oven.

In summary, the cleaning of precision metal stamping parts is a systematic process that requires selecting appropriate cleaning methods based on actual conditions, and strictly controlling the quality of each link to ensure that each product meets the standard of cleanliness and flawless.